Fedora24是一款由Red Hat策劃開發的操作系統，它在新版中采用了GNOME 3.20預覽桌面，使用戶第一眼看上去與以往版本變化不是特別的大，不過其系統內核一些細節方面還是有所不同的；Fedora項目的目標是與Linux社區協作，只從開放 源碼軟件來創建一份完整的、通用的操作系統。其開發過程是以公開論壇的形式進行的，不過在很多用戶下載Fedora24系統后，不知道如何安裝，故此武林軟件園小編為大家提供了兩種不同的安裝方式，需要的朋友趕快試試吧！

中文安裝教程

　　1、本次安裝以Fedora24為例，小編使用的虛擬機為“VMware”;

VMware Workstation(虛擬機)

大小：195.58 MB版本：12.5.9 官方中文版環境：WinXP, Win7, Win8, Win10, Win All

進入下載

Fedora 24 Alpha 官方最新版

大小：1.37 GB版本：環境：WinXP, Win7, Win8, Win10, WinAll

進入下載

　　2、運行虛擬機，點擊“創建虛擬機”

　　3、點擊瀏覽載入下載的Fedora 24系統鏡像

　　4、設置虛擬機名稱和位置

　　5、設置磁盤大小，建議為20GB，大家也可以根據需要自行設置

　　6、點擊“完成”開始創建，此處也可以在自定義硬件中將內存和CPU核心的數值適量提高

　　7、載入成功后，選擇“Start Fedora Live”

　　8、選擇“Install to hard Drive”

　　9、選擇語言為“簡體中文”

　　10、點擊安裝位置，系統默認是自動配置分區，對Linux系統比較了解的朋友也可以自行配置，完成后我們就可以開始安裝了

　　11、點擊“開始安裝”

　　12、在安裝過程中，我們可以對點擊對ROOT密碼和用戶進行設置

　　13、ROOT密碼

　　14、創建用戶

　　15、安裝配置全部完成后，重啟虛擬機就可以使用了Fedora 24系統了！

英文安裝教程

　　[1]Download Fedora 24 ( released on 21 June, 2016 ) from the following site.

　　[2]Select the language you'd like to use during the installation.

　　[3]This is the default screen for some basic configuration. First, set Keymap, click KEYBOARD icon.

　　[4]Click "+" button on under-left.

　　[5]Select your keyboard type and click "Add" button.

　　[6]After adding keyboard layout, send up your keyboard on the top for 1st priority like follows and click "Done" button which is upper left to finish.

　　[7]Back to the default screen of [3]. Next, set timezone, click DATE&TIME icon and Click a point on the map you'd like to set your timezone and push "Done" button which is on the upper left.

　　[8]Back to the default screen of [3]. Click "INSTALLATION DESTINATION", then following screen is shown. If some HDDs are attached on your computer, select installation destination disk. Furthermore, if you'd like to edit the partition layouts manually, select "I will configure partitioning", if you select "Automatically configure partitioning", partitioning are automatically done. If it's OK all, click "Done" button which is upper-left to finish this section.

　　[9]Back to the default screen of [3]. Set software selection to install. Click SOFTWARE SELECTION icon, then following screen is shown. Select the base environment you'd like to install. This example proceeds with selecting "Fedora Server".

　　[10]If it's OK all, click "Begin Installation" and proceed to next.

　　[11]Installation starts and required to set root password and to create a common user. Click the each icon and move to configuration.

　　[12]On the root password settings, input any password you like and click "Done" button to finish as follows.

　　[13]On the common user settings, input any username and password you like and click "Done" button to finish as follows.

　　[14]Click "Reboot" in the lower right after finishing installation.

　　[15]After rebooting, login prompt is shown like follows. login with root user and his password you set during installation. Installing Fedora 24 completes if you can login normally.

　　上述方法教程是武林軟件園小編為大家提供的中英文安裝方法，更多軟件操作教程，請繼續關注武林軟件園！