at FAR sec. 52.227-19 and subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc. 170 West Tasman Drive San Jose, California 95134-1706
Cisco Internetwork Operating System Software IOS (tm) s72033_rp Software (s72033_rp-PK9S-M), Version 12.2(17a)SX1, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1) TAC Support: http://www.cisco.com/tac Copyright (c) 1986-2003 by cisco Systems, Inc. Compiled Wed 29-Oct-03 08:16 by cmong Image text-base: 0x40008FBC, data-base: 0x41E50000
This PRodUCt contains cryptographic features and is subject to United States and local country laws governing import, eXPort, transfer and use. Delivery of Cisco cryptographic products does not imply third-party authority to import, export, distribute or use encryption. Importers, exporters, distributors and users are responsible for compliance with U.S. and local country laws. By using this product you agree to comply with applicable laws and regulations. If you are unable to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at: http://www.cisco.com/wwl/export/crypto/tool/stqrg.Html
If you require further assistance please contact us by sending email to export@cisco.com.
cisco WS-C6509 (R7000) processor (revision 3.0) with 458752K/65536K bytes of memory. Processor board ID SAL0743NKW8 SR71000 CPU at 600Mhz, Implementation 0x504, Rev 1.2, 512KB L2 Cache Last reset from power-on X.25 software, Version 3.0.0. Bridging software. 1 Virtual Ethernet/IEEE 802.3 interface(s) 48 FastEthernet/IEEE 802.3 interface(s) 36 Gigabit Ethernet/IEEE 802.3 interface(s) 1917K bytes of non-volatile configuration memory. 8192K bytes of packet buffer memory.
65536K bytes of Flash internal SIMM (Sector size 512K). Logging of %SNMP-3-AUTHFAIL is enabled Press RETURN to get started! --- System Configuration Dialog --- Would you like to enter the initial dialog? [yes]: no 回答：NO，進入手工配置，在router>下，輸入enable 回車，進入全局模式 2.2. 遠程telnet連接 當完成交換機配置，并起給交換機配置了治理地址，就可以直接采用遠程telnet登 陸進入交換機了，但是必須先配置
