這個配置比起原來的有固定ip地址的配置要難很多，要考慮到方方面面的東西，在這里，大家可以少走彎路了： vpdn enable no vpdn logging ! vpdn-group pppoe request-dialin PRotocol pppoe ! interface Ethernet0 no shut ip address ip adjust-mss 1452 ip nat inside no ip directed-broadcast ! interface ATM0 no shut no ip address no ip directed-broadcast no atm ilmi-keepalive bundle-enable ! interface ATM0.1 point-to-point no ip directed-broadcast pvc pppoe-client dial-pool-number 1 ! ! interface Dialer1 ip address negotiated mtu 1492 ip nat outside encapsulation ppp dialer pool 1 ppp chap hostname ppp chap passWord ppp pap sent-username password ! ip nat inside source list 1 interface Dialer1 overload ! ip classless ip route 0.0.0.0 0.0.0.0 dialer1 access-list 1 permit 0.0.255.255
