軟件要求：
Solaris 9
Sun Cluster 3.1
Veritas VxVM 3.5(需要VxVM的License和Cluster Volume Manager(CVM)的License )
Oracle 9i EnterPRise Edition
Sun 3310陣列驅動
硬件要求：
Sun 480 兩臺
Sun QFE四口網卡 2塊
Sun SCSI卡X6758A 2塊
Sun 3310陣列 2臺
一、安裝硬件
二、配置陣列3310，要求如下：
要求如下：
兩臺都一樣
c2t5d0 quorum盤 512M
c2t5d1 ora-rac-dg Log盤 256M
c2t5d2 ora-rac-dg 盤 140G
c2t5d3 ora-arc-dg Log盤 256M
c2t5d4 ora-arc-dg 盤 剩下的空間
c3t5d0 quorum盤 512M
c3t5d1 ora-rac-dg Log盤 256M
c3t5d2 ora-rac-dg 盤 140G
c3t5d3 ora-arc-dg Log盤 256M
c3t5d4 ora-arc-dg 盤 剩下的空間
三、安裝操作系統
以Sun 480 36G硬盤為例，分區如下:
# format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c1t0d0 <SUN36G cyl 24620 alt 2 hd 27 sec 107>
/pci@9,600000/SUNW,qlc@2/fp@0,0/ssd@w2100000c50695b66,0
1. c1t1d0 <SUN36G cyl 24620 alt 2 hd 27 sec 107>
/pci@9,600000/SUNW,qlc@2/fp@0,0/ssd@w2100000c50695de5,0
Specify disk (enter its number): 0
selecting c1t0d0
[disk formatted]
Warning: Current Disk has mounted partitions.
format> p
partition> p
Current partition table (original):
Total disk cylinders available: 24620 + 2 (reserved cylinders)
Part Tag Flag Cylinders Size Blocks
0 root wm 5808 - 13067 10.00GB (7260/0/0) 20974140
1 var wm 13068 - 14519 2.00GB (1452/0/0) 4194828
2 backup wm 0 - 24619 33.92GB (24620/0/0) 71127180
3 swap wu 0 - 5807 8.00GB (5808/0/0) 16779312
4 unassigned wm 0 0 (0/0/0) 0
5 unassigned wm 14520 - 21779 10.00GB (7260/0/0) 20974140
6 unassigned wm 21780 - 22142 512.06MB (363/0/0) 1048707
7 unassigned wm 0 0 (0/0/0) 0
四、給操作系統打補丁(采用最新的補丁盤)
# cd /cdrom/eis-cd/sun/install
# ./setup-standard.sh
# cd /cdrom/eis-cd/sun/patch/9
# ../../install/bin/unpack_patches
# cd /tmp/9
# eject cdrom
# ./install_all_patches
五、安裝3310的驅動和補丁
# ls
112697-04 SUNWqus SUNWqusu SUNWqusux SUNWqusx
# pkgadd -d . all
（一路yes即可）
# patchadd 112697-04
在文件/etc/kernel/sd.conf文件中加入如下幾行：
name="sd" class="scsi" target=5 lun=0;
name="sd" class="scsi" target=5 lun=1;
name="sd" class="scsi" target=5 lun=2;
name="sd" class="scsi" target=5 lun=3;
name="sd" class="scsi" target=5 lun=4;
# reboot
重起后，使用format命令檢查磁盤陣列的配置是否正確。
# format
Searching for disks...done
c2t5d0: configured with capacity of 510.00MB
c2t5d1: configured with capacity of 254.00MB
c2t5d2: configured with capacity of 136.71GB
c2t5d3: configured with capacity of 254.00MB
c2t5d4: configured with capacity of 66.62GB
c3t5d0: configured with capacity of 510.00MB
c3t5d1: configured with capacity of 254.00MB
c3t5d2: configured with capacity of 136.71GB
c3t5d3: configured with capacity of 254.00MB
c3t5d4: configured with capacity of 66.62GB
AVAILABLE DISK SELECTIONS:
0. c1t0d0 <SUN36G cyl 24620 alt 2 hd 27 sec 107>
/pci@9,600000/SUNW,qlc@2/fp@0,0/ssd@w2100000c5069619e,0
1. c1t1d0 <SUN36G cyl 24620 alt 2 hd 27 sec 107>
/pci@9,600000/SUNW,qlc@2/fp@0,0/ssd@w2100000c50695ef2,0
2. c2t5d0 <SUN-StorEdge3310-0325 cyl 510 alt 2 hd 64 sec 32>
/pci@8,700000/pci@3/scsi@4/sd@5,0
3. c2t5d1 <SUN-StorEdge3310-0325 cyl 254 alt 2 hd 64 sec 32>
/pci@8,700000/pci@3/scsi@4/sd@5,1
4. c2t5d2 <SUN-StorEdge3310-0325 cyl 35273 alt 2 hd 127 sec 64>
/pci@8,700000/pci@3/scsi@4/sd@5,2
5. c2t5d3 <SUN-StorEdge3310-0325 cyl 254 alt 2 hd 64 sec 32>
/pci@8,700000/pci@3/scsi@4/sd@5,3
6. c2t5d4 <SUN-StorEdge3310-0325 cyl 34112 alt 2 hd 64 sec 64>
/pci@8,700000/pci@3/scsi@4/sd@5,4
7. c3t5d0 <SUN-StorEdge3310-0325 cyl 510 alt 2 hd 64 sec 32>
/pci@8,700000/pci@3/scsi@5/sd@5,0
8. c3t5d1 <SUN-StorEdge3310-0325 cyl 254 alt 2 hd 64 sec 32>
/pci@8,700000/pci@3/scsi@5/sd@5,1
9. c3t5d2 <SUN-StorEdge3310-0325 cyl 35273 alt 2 hd 127 sec 64>
/pci@8,700000/pci@3/scsi@5/sd@5,2
10. c3t5d3 <SUN-StorEdge3310-0325 cyl 254 alt 2 hd 64 sec 32>
/pci@8,700000/pci@3/scsi@5/sd@5,3
11. c3t5d4 <SUN-StorEdge3310-0325 cyl 34112 alt 2 hd 64 sec 64>
/pci@8,700000/pci@3/scsi@5/sd@5,4
Specify disk (enter its number): 0
selecting c1t0d0
[disk formatted]
Warning: Current Disk has mounted partitions.
format> q
六、配置/etc/hosts文件和/.profile文件
rac1:
root@rac1 # cat /etc/hosts
#
# Internet host table
#
127.0.0.1 localhost
192.168.0.201 rac1 loGhost a.b
192.168.0.202 rac2
在/.profile文件中加入以下內容：
PATH=$PATH:/usr/cluster/bin:/etc/vx/bin
eXPort PATH
MANPATH=$MANPATH:/usr/cluster/man:/usr/share/man:/opt/VRTS/man
export MANPATH
rac2:
root@rac2 # cat /etc/hosts
#
# Internet host table
#
127.0.0.1 localhost
192.168.0.202 rac2 loghost a.b
192.168.0.201 rac1
在/.profile文件中加入以下內容：
PATH=$PATH:/usr/cluster/bin:/etc/vx/bin
export PATH
MANPATH=$MANPATH:/usr/cluster/man:/usr/share/man:/opt/VRTS/man
export MANPATH
七、安裝Sun Cluster 3.1，并打Sun Cluster 3.1的補丁
建立主節點：
# cd /opt/suncluster_3_1/SunCluster_3.1/Sol_9/Tools
# ./scinstall
*** Main Menu ***
Please select from one of the following (*) options:
* 1) Establish a new cluster using this machine as the first node
* 2) Add this machine as a node in an established cluster
3) Configure a cluster to be JumpStarted from this install server
4) Add support for new data services to this cluster node
5) Print release information for this cluster node
* ?) Help with menu options
* q) Quit
Option:1
*** Establishing a New Cluster ***
This option is used to establish a new cluster using this machine as the first node in that cluster.
Once the cluster framework software is installed, you will be asked for the name of the cluster. Then, sccheck(1M) is run to test this machine for basic Sun Cluster pre-configuration requirements.
After sccheck(1M) passes, you will be a
