linux中掛載硬盤報錯提示 you must specify the filesystem type,意思是告訴我們必須要指定一個系統分區了,由于自己能看懂幾句英文,所以解決起來也方便了,下面一起來整個操作流程吧.
今天自己的虛擬機磁盤用完成,于是想加一磁盤,當掛載時發現報錯you must specify the filesystem type,注,我的系統環境是lcentos6.3裝在virtualbox的虛擬機.
原來是因?yàn)樵摯疟P沒有格式分區導致的于是有了以下操作.
1）先查看一下當前的系統情況,新加的盤是sdb,代碼如下:
[root@test ~]# lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sr0 11:0 1 1024M 0 rom sda 8:0 0 8G 0 disk ├─sda1 8:1 0 500M 0 part /boot └─sda2 8:2 0 7.5G 0 part ├─VolGroup-lv_root (dm-0) 253:0 0 6.6G 0 lvm / └─VolGroup-lv_swap (dm-1) 253:1 0 992M 0 lvm [SWAP] sdb 8:16 0 8G 0 disk 2）嘗試掛載,報錯,代碼如下:
[root@test ~]# mount /dev/sdb /disk mount: you must specify the filesystem type 3）格式化該磁盤,代碼如下:
[root@test ~]# mkfs.ext3 /dev/sdb mke2fs 1.41.12 (17-May-2010) /dev/sdb is entire device, not just one partition! 無論如何也要繼續? (y,n) y
文件系統標簽=
操作系統:Linux
塊大小=4096 (log=2)
分塊大小=4096 (log=2)
Stride=0 blocks, Stripe width=0 blocks 524288 inodes, 2097152 blocks 104857 blocks (5.00%) reserved for the super user 第一個數據塊=0.
Maximum filesystem blocks=2147483648 64 block groups 32768 blocks per group, 32768 fragments per group 8192 inodes per group --phpfensi.com Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632 正在寫入inode表:完成.
This filesystem will be automatically checked every 27 mounts or 180 days, whichever comes first. Use tune2fs -c or -i to override. [root@test ~]# 4）掛載成功,代碼如下:
[root@test ~]# cd /disk/ [root@test disk]# ls lost+found 5）增加開機啟動,代碼如下:
