在Linux下系統調用是用軟中斷實現的，下面以一個簡單的open例子簡要分析一下應用層的open是如何調用到內核中的sys_open的。
t8.c
1: #include <stdio.h>
2: #include <sys/types.h>
3: #include <sys/stat.h>
4: #include <fcntl.h>
5:
6: int main(int argc, const char *argv[])
7: {8: int fd;
9:
10: fd = open(".", O_RDWR);11:
12: close(fd);
13: return 0;
14: }
這里需要注意的是：open是C庫提供的庫函數，并不是系統調用，系統調用時在內核空間的，應用空間無法直接調用。在《Linux內核設計與實現》中說：要訪問系統調用（在Linux中常稱作syscall），通常通過C庫中定義的函數調用來進行。
將t8.c進行靜態編譯，然后反匯編，看一下是如何調用open的？
1: arm-linux-gcc t8.c --static
2: arm-linux-objdump -D a.out >a.dis
下面我們截取a.dis中的一部分進行說明：
1: ......
2: 00008228 <main>:
3: 8228: e92d4800 push {fp, lr}4: 822c: e28db004 add fp, sp, #4 ; 0x4
5: 8230: e24dd010 sub sp, sp, #16 ; 0x10
6: 8234: e50b0010 str r0, [fp, #-16]
7: 8238: e50b1014 str r1, [fp, #-20]
8: 823c: e59f0028 ldr r0, [pc, #40] ; 826c <main+0x44>
9: 8240: e3a01002 mov r1, #2 ; 0x2 ; #define O_RDWR 00000002
10: 8244: eb002e7d bl 13c40 <__libc_open>
11: 8248: e1a03000 mov r3, r0
12: 824c: e50b3008 str r3, [fp, #-8]
13: 8250: e51b0008 ldr r0, [fp, #-8]
14: 8254: eb002e9d bl 13cd0 <__libc_close>
15: 8258: e3a03000 mov r3, #0 ; 0x0
16: 825c: e1a00003 mov r0, r3
17: 8260: e24bd004 sub sp, fp, #4 ; 0x4
18: 8264: e8bd4800 pop {fp, lr}19: 8268: e12fff1e bx lr
20: 826c: 00064b8c .Word 0x00064b8c
21: ......
22: 00013c40 <__libc_open>:
23: 13c40: e51fc028 ldr ip, [pc, #-40] ; 13c20 <___fxstat64+0x50>
24: 13c44: e79fc00c ldr ip, [pc, ip]
25: 13c48: e33c0000 teq ip, #0 ; 0x0
26: 13c4c: 1a000006 bne 13c6c <__libc_open+0x2c>
27: 13c50: e1a0c007 mov ip, r7
28: 13c54: e3a07005 mov r7, #5 ; 0x5
#在arch/arm/include/asm/unistd.h中：#define __NR_open (__NR_SYSCALL_BASE+5)
其中，__NR_OABI_SYSCALL_BASE是0
29:13c58: ef000000 svc 0x00000000 #產生軟中斷
30: 13c5c: e1a0700c mov r7, ip
31: 13c60: e3700a01 cmn r0, #4096 ; 0x1000
32: 13c64: 312fff1e bxcc lr
33: 13c68: ea0008d4 b 15fc0 <__syscall_error>
34: ......
通過上面的代碼注釋，可以看到，系統調用sys_open的系統調用號是5，將系統調用號存放到寄存器R7當中，然后應用程序通過svc 0x00000000產生軟中斷，陷入內核空間。
也許會好奇，ARM軟中斷不是用SWI嗎，這里怎么變成了SVC了，請看下面一段話，是從ARM官網copy的：
SVC
超級用戶調用。 語法
SVC{cond} #immed
其中：
cond
是一個可選的條件代碼（請參閱條件執行）。 immed
是一個表達式，其取值為以下范圍內的一個整數：
在 ARM 指令中為 0 到 224–1（24 位值）
在 16 位 Thumb 指令中為 0-255（8 位值）。
用法
SVC 指令會引發一個異常。 這意味著處理器模式會更改為超級用戶模式，CPSR 會保存到超級用戶模式 SPSR，并且執行會跳轉到 SVC 向量（請參閱《開發指南》中的第 6 章 處理處理器異常）。
處理器會忽略 immed。 但異常處理程序會獲取它，借以確定所請求的服務。 Note
作為 ARM 匯編語言開發成果的一部分，SWI 指令已重命名為 SVC。 在此版本的 RVCT 中，SWI 指令反匯編為 SVC，并提供注釋以指明這是以前的 SWI。 條件標記
此指令不更改標記。 體系結構
此 ARM 指令可用于所有版本的 ARM 體系結構。
在基于ARM的Linux中，異常向量表已經被放置在了0xFFFF0000這個位置。這個過程的完成：
start_kernel ---> setup_arch ---> early_trap_init
1: void __init early_trap_init(void)
2: {3: unsigned long vectors = CONFIG_VECTORS_BASE; // 就是0xFFFF0000
4: extern char __stubs_start[], __stubs_end[];
5: extern char __vectors_start[], __vectors_end[];
6: extern char __kuser_helper_start[], __kuser_helper_end[];
7: int kuser_sz = __kuser_helper_end - __kuser_helper_start;
8:
9: /*
10: * Copy the vectors, stubs and kuser helpers (in entry-armv.S)
11: * into the vector page, mapped at 0xffff0000, and ensure these
12: * are visible to the instruction stream.
13: */
14: memcpy((void *)vectors, __vectors_start, __vectors_end - __vectors_start);
15: memcpy((void *)vectors + 0x200, __stubs_start, __stubs_end - __stubs_start);
16: memcpy((void *)vectors + 0x1000 - kuser_sz, __kuser_helper_start, kuser_sz);
17:
18: /*
19: * Copy signal return handlers into the vector page, and
20: * set sigreturn to be a pointer to these.
21: */
22: memcpy((void *)KERN_SIGRETURN_CODE, sigreturn_codes,
23: sizeof(sigreturn_codes));
24:
25: flush_icache_range(vectors, vectors + PAGE_SIZE);
26: modify_domain(DOMAIN_USER, DOMAIN_CLIENT);
27: }
關于上面這個函數的詳細解釋，參見：
http://www.CUOXin.com/pengdonglin137/p/3603549.html
把異常中斷向量表的位置設置為0xffff0000的話，需要修改協處理器CP15的寄存器C1的第13位，將其設置為1。以Tq2440的提供的內核2.6.30.4為例看一下：
arch/arm/kernel/head.S
1: adr lr, __enable_mmu @ return (PIC) address
2: add pc, r10, #PROCINFO_INITFUNC
其中，PROCINFO_INITFUNC的值是16，r10的值是__arm920_proc_info的地址：
1: __arm920_proc_info:
2: .long 0x41009200
3: .long 0xff00fff0
4: .long PMD_TYPE_SECT | /
5: PMD_SECT_BUFFERABLE | /
6: PMD_SECT_CACHEABLE | /
7: PMD_BIT4 | /
8: PMD_SECT_AP_WRITE | /
9: PMD_SECT_AP_READ
10: .long PMD_TYPE_SECT | /
11: PMD_BIT4 | /
12: PMD_SECT_AP_WRITE | /
13: PMD_SECT_AP_READ
14: b __arm920_setup
15: .long cpu_arch_name
16: .long cpu_elf_name
17: ......
18: .size __arm920_proc_info, . - __arm920_proc_info
看一下__arm920_setup的實現(proc-arm920.S (arch/arm/mm))：
1: .type __arm920_setup, #function
2: __arm920_setup:
3: mov r0, #0
4: mcr p15, 0, r0, c7, c7 @ invalidate I,D caches on v4
5: mcr p15, 0, r0, c7, c10, 4 @ drain write buffer on v4
6: #ifdef CONFIG_MMU
7: mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs on v4
8: #endif
9: adr r5, arm920_crval
10: ldmia r5, {r5, r6} @ 參看以下下面的arm920_crval的實現，本句話執行完后r5和r6分別為：0x3f3f和0x313511: mrc p15, 0, r0, c1, c0 @ get control register v4 獲取協處理器p15的寄存器才c1
12:bic r0, r0, r5
13:orr r0, r0, r6 @ 我們只關注第13位，這里將r0的第13位設置為了1
14:mov pc, lr
15: .size __arm920_setup, . - __arm920_setup
16:
17: /*
18: * R
19: * .RVI ZFRS BLDP WCAM
20: * ..11 0001 ..11 0101
21: *
22: */
23: .type arm920_crval, #object
24: arm920_crval:
25: crval clear=0x00003f3f, mmuset=0x00003135, ucset=0x00001130
在看一下crval的實現(proc-macros.S (arch/arm/mm))：
1: .macro crval, clear, mmuset, ucset
2: #ifdef CONFIG_MMU
3: .word /clear
4: .word /mmuset
5: #else
6: .word /clear
7: .word /ucset
8: #endif
9: .endm
在__arm920_setup中執行完 mov pc, lr后，便跳入了下面的語句：
1: __enable_mmu:
2: #ifdef CONFIG_ALIGNMENT_TRAP
3: orr r0, r0, #CR_A
4: #else
5: bic r0, r0, #CR_A
6: #endif
7: #ifdef CONFIG_CPU_DCACHE_DISABLE
8: bic r0, r0, #CR_C
9: #endif
10: #ifdef CONFIG_CPU_BPREDICT_DISABLE
11: bic r0, r0, #CR_Z
12: #endif
13: #ifdef CONFIG_CPU_ICACHE_DISABLE
14: bic r0, r0, #CR_I
15: #endif
16: mov r5, #(domain_val(DOMAIN_USER, DOMAIN_MANAGER) | /
17: domain_val(DOMAIN_KERNEL, DOMAIN_MANAGER) | /
18: domain_val(DOMAIN_TABLE, DOMAIN_MANAGER) | /
19: domain_val(DOMAIN_IO, DOMAIN_CLIENT))
20: mcr p15, 0, r5, c3, c0, 0 @ load domain access register
21: mcr p15, 0, r4, c2, c0, 0 @ load page table pointer
22: b __turn_mmu_on
23: ENDPROC(__enable_mmu)
看一下__turn_mmu_on的實現(head.S (arch/arm/kernel))：
1: .align 5
2: __turn_mmu_on:
3: mov r0, r0
4: mcr p15, 0, r0, c1, c0, 0 @ write control reg
5: mrc p15, 0, r3, c0, c0, 0 @ read id reg
6: mov r3, r3
7: mov r3, r3
8: mov pc, r13
9: ENDPROC(__turn_mmu_on)
在__turn_mmu_on中，將寄存器r0的值寫到了cp15協處理器的寄存器C1中。到這里便完成了將異常中斷向量表的位置放到了0xffff0000.
說完異常向量表的位置，接下來看看軟中斷的實現。
ARM提供的中斷類型：
ARM的異常處理模型：
entry-armv.S (arch/arm/kernel)
1: .LCvswi:
2:.word vector_swi
3:
4: .globl __stubs_end
5: __stubs_end:
6:
7: .equ stubs_offset, __vectors_start + 0x200 - __stubs_start
8:
9: .globl __vectors_start
10: __vectors_start:
11: swi SYS_ERROR0
12: b vector_und + stubs_offset
13: ldr pc, .LCvswi + stubs_offset @發生軟中斷后先跳到這里
14: b vector_pabt + stubs_offset
15: b vector_dabt + stubs_offset
16: b vector_addrexcptn + stubs_offset
17: b vector_irq + stubs_offset
18: b vector_fiq + stubs_offset
19:
20: .globl __vectors_end
21: __vectors_end:
22:
23: .data
24:
25: .globl cr_alignment
26: .globl cr_no_alignment
27: cr_alignment:
28: .space 4
29: cr_no_alignment:
30: .space 4
接下來看一下vector_swi的實現，根據實際的宏定義進行了簡化
1: ENTRY(vector_swi)
2: sub sp, sp, #S_FRAME_SIZE
3: stmia sp, {r0 - r12} @ Calling r0 - r124: add r8, sp, #S_PC
5: stmdb r8, {sp, lr}^ @ Calling sp, lr6: mrs r8, spsr @ called from non-FIQ mode, so ok.
7: str lr, [sp, #S_PC] @ Save calling PC
8: str r8, [sp, #S_PSR] @ Save CPSR
9: str r0, [sp, #S_OLD_R0] @ Save OLD_R0
10: zero_fp
11:
12: /*
13: * Get the system call number.
14: */
15:
16: /*
17: * If we have CONFIG_OABI_COMPAT then we need to look at the swi
18: * value to determine if it is an EABI or an old ABI call.
19: */
20: ldr r10, [lr, #-4]
@ get SWI instruction r10中存放的就是引起軟中斷的那條指令的機器碼
發生軟中斷的時候，系統自動將PC-4存放到了lr寄存器，由于是三級流水，
并且是ARM狀態，還需要減4才能得到發生軟中斷的那條指令的機器碼所在的地址
21: A710( and ip, r10, #0x0f000000 @ check for SWI )
22: A710( teq ip, #0x0f000000 )
23: A710( bne .Larm710bug )
24:
25: ldr ip, __cr_alignment
26: ldr ip, [ip]
27: mcr p15, 0, ip, c1, c0 @ update control register
28: enable_irq @在發生中斷的時候，相應的中斷線在在所有CPU上都會被屏蔽掉
29:
30:get_thread_info tsk @ 參看下面的介紹
31: adr tbl, sys_call_table
@ load syscall table pointer 此時tbl(r8)中存放的就是sys_call_table的起始地址
32: ldr ip, [tsk, #TI_FLAGS] @ check for syscall tracing
33:
34: /*
35: * If the swi argument is zero, this is an EABI call and we do nothing.
36: *
37: * If this is an old ABI call, get the syscall number into scno and
38: * get the old ABI syscall table address.
39: */
40: bics r10, r10, #0xff000000
41: eorne scno, r10, #__NR_OABI_SYSCALL_BASE
42: ldrne
tbl, =sys_oabi_call_table
43:
44: stmdb sp!, {r4, r5} @ push fifth and sixth args45: tst ip, #_TIF_SYSCALL_TRACE @ are we tracing syscalls?
46: bne __sys_trace
47:
48: cmp scno, #NR_syscalls @ check upper syscall limit
49: adr lr, ret_fast_syscall @ return address
50:ldrcc pc, [tbl, scno, lsl #2] @ call sys_* routine
51:
52: add r1, sp, #S_OFF
53: 2: mov why, #0 @ no longer a real syscall
54: cmp scno, #(__ARM_NR_BASE - __NR_SYSCALL_BASE)
55: eor r0, scno, #__NR_SYSCALL_BASE @ put OS number back
56: bcs arm_syscall
57: b sys_ni_syscall @ not private func
58: ENDPROC(vector_swi)
entry-common.S (arch/arm/kernel下面是entry-header.S (arch/arm/kernel)的部分內容：
1: /*
2: * These are the registers used in the syscall handler, and allow us to
3: * have in theory up to 7 arguments to a function - r0 to r6.
4: *
5: * r7 is reserved for the system call number for thumb mode.
6: *
7: * Note that tbl == why is intentional.
8: *
9: * We must set at least "tsk" and "why" when calling ret_with_reschedule.
10: */
11: scno .req r7 @ syscall number
12: tbl .req r8 @ syscall table pointer
13: why .req r8 @ Linux syscall (!= 0)
14: tsk .req r9 @ current thread_info
.req 是偽匯編，以 scno .req r7 為例，表示scno是寄存器r7的別名。
其中，tsk是寄存器r9的別名，get_thread_info是一個宏定義，如下：
1: .macro get_thread_info, rd
2: mov /rd, sp, lsr #13
3: mov /rd, /rd, lsl #13
4: .endm
即：將sp進行8KB對齊后的值賦給寄存器r9，什么意思？
這個就涉及到Linux的內核棧了。Linux為每個進程都分配了一個8KB的內核棧，在內核棧的尾端存放有關于這個進程的struct therad_info結構：
1: struct thread_info {2: unsigned long flags; /* low level flags */
3: int preempt_count; /* 0 => preemptable, <0 => bug */
4: mm_segment_t addr_limit; /* address limit */
5: struct task_struct *task; /* main task structure */
6: struct exec_domain *exec_domain; /* execution domain */
7: __u32 cpu; /* cpu */
8: __u32 cpu_domain; /* cpu domain */
9: struct cpu_context_save cpu_context; /* cpu context */
10: __u32 syscall; /* syscall number */
11: __u8 used_cp[16]; /* thread used copro */
12: unsigned long tp_value;
13: struct crunch_state crunchstate;
14: union fp_state fpstate __attribute__((aligned(8)));
15: union vfp_state vfpstate;
16: #ifdef CONFIG_ARM_THUMBEE
17: unsigned long thumbee_state; /* ThumbEE Handler Base register */
18: #endif
19: struct restart_block restart_block;
20: };
通過上面的操作，寄存器r9中就是這個進程的thread_info結構的起始地址。
entry-common.S (arch/arm/kernel)
1: .type sys_call_table, #object
2: ENTRY(sys_call_table)
3: #include "calls.S"
4: #undef ABI
5: #undef OBSOLETE
其中，calls.S的內容如下：
1: /*
2: * linux/arch/arm/kernel/calls.S
3: *
4: * Copyright (C) 1995-2005 Russell King
5: *
6: * This program is free software; you can redistribute it and/or modify
7: * it under the terms of the GNU General Public License version 2 as
8: * published by the Free Software Foundation.
9: *
10: * This file is included thrice in entry-common.S
11: */
12: /* 0 */ CALL(sys_restart_syscall)
13: CALL(sys_exit)
14: CALL(sys_fork_wrapper)
15: CALL(sys_read)
16: CALL(sys_write)
17: /* 5 */ CALL(sys_open)
18: CALL(sys_close)
19: CALL(sys_ni_syscall) /* was sys_waitpid */
20: CALL(sys_creat)
21: CALL(sys_link)
22: /* 10 */ CALL(sys_unlink)
23: CALL(sys_execve_wrapper)
24: CALL(sys_chdir)
25: CALL(OBSOLETE(sys_time)) /* used by libc4 */
26: CALL(sys_mknod)
27: ......
28: /* 355 */ CALL(sys_signalfd4)
29: CALL(sys_eventfd2)
30: CALL(sys_epoll_create1)
31: CALL(sys_dup3)
32: CALL(sys_pipe2)
33: /* 360 */ CALL(sys_inotify_init1)
34: CALL(sys_preadv)
35: CALL(sys_pwritev)
36: #ifndef syscalls_counted
37: .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
38: #define syscalls_counted
39: #endif
40: .rept syscalls_padding
41: CALL(sys_ni_syscall)
42: .endr
關于這個部分的更多介紹參見：
http://www.CUOXin.com/pengdonglin137/p/3714981.html
執行這個操作的時候，r10中存放的是SWI instruction，在我們的例子中就是（a.dis）：
即：r10 為 0xEF000000
顯然，bics這條指令下面的兩個語句由于條件不成立，無法獲得執行。這條指令的作用是獲得系統調用號
可以參考這個手冊，看一下svc執行的格式：
http://files.CUOXin.com/pengdonglin137/DUI0203IC_rvct_developer_guide.pdf
可以看到，[23:0]存放的就是svc指令后面的那個立即數，也即系統調用號。
不過需要注意的是：我們這里并沒有這樣做，我們的做法是（a.dis中可以看到）:
使用的是svc 0，后面跟的并不是系統調用號，而是0，這里把系統調用號存放在了寄存器r7中（a.dis中）：
可以看到，由于使用的sys_open系統調用，所以把它的系統調用號5存放到了寄存器r7當中
這里的scno是就是寄存器r7的別名，它的值是sys_open的系統調用號5，由于在calls.S中每個系統調用標號占用4個字節，所以這個將scno的值乘以4然后再加上tbl，tbl是系統調用表sys_call_table的基地址。然后就跳入開始執行sys_open了。
asmlinkage long sys_open(const char __user *filename, int flags, int mode);
那么sys_open在哪呢？在內核源碼中直接搜索sys_open，無法搜到它的實現代碼，實際上它是在fs/open.c中實現的：
1: SYSCALL_DEFINE3(open, const char __user *, filename, int, flags, int, mode)
2: {3: long ret;
4:
5: if (force_o_largefile())
6: flags |= O_LARGEFILE;
7:
8: ret = do_sys_open(AT_FDCWD, filename, flags, mode);
9: /* avoid REGPARM breakage on x86: */
10: asmlinkage_protect(3, ret, filename, flags, mode);
11: return ret;
12: }
其中SYSCALL_DEFINE3是一個宏：
syscalls.h (include/linux)
#define SYSCALL_DEFINE3(name, ...) SYSCALL_DEFINEx(3, _##name, __VA_ARGS__)
SYSCALL_DEFINEx也是一個宏：
syscalls.h (include/linux)
#define SYSCALL_DEFINEx(x, sname, ...) / __SYSCALL_DEFINEx(x, sname, __VA_ARGS__)
__SYSCALL_DEFINEx仍然是個宏:
syscalls.h (include/linux)
#define __SYSCALL_DEFINEx(x, name, ...) / asmlinkage long sys##name(__SC_DECL##x(__VA_ARGS__))
所以展開后的結果就是：
asmlinkage long sys_open(__SC_DECL3(__VA_ARGS__))
其中，__SC_DECL3定義如下：
syscalls.h (include/linux)
1: #define __SC_DECL1(t1, a1) t1 a1
2: #define __SC_DECL2(t2, a2, ...) t2 a2, __SC_DECL1(__VA_ARGS__)
3: #define __SC_DECL3(t3, a3, ...) t3 a3, __SC_DECL2(__VA_ARGS__)
所以最終的結果如下：
1: asmlinkage long sys_open(const char __user *filename, int flags, int mode)
2: {3: long ret;
4:
5: if (force_o_largefile())
6: flags |= O_LARGEFILE;
7:
8: ret = do_sys_open(AT_FDCWD, filename, flags, mode);
9: /* avoid REGPARM breakage on x86: */
10: asmlinkage_protect(3, ret, filename, flags, mode);
11: return ret;
12:
13: }
關于sys_open本身的實現這里就不深入分析了。
接下來看一下返回。
當sys_open中return后，便跳入ret_fast_syscall處開始執行：
1: /*
2: * This is the fast syscall return path. We do as little as
3: * possible here, and this includes saving r0 back into the SVC
4: * stack.
5: */
6: ret_fast_syscall:
7: UNWIND(.fnstart )
8: UNWIND(.cantunwind )
9: disable_irq @ disable interrupts
10:ldr r1, [tsk, #TI_FLAGS] @將thread_info中的flags成員存放到r1中
11: tst r1, #_TIF_WORK_MASK
12: bne fast_work_pending
13:
14: /* perform architecture specific actions before user return */
15: arch_ret_to_user r1, lr
16:
17: @ fast_restore_user_regs
18: ldr r1, [sp, #S_OFF + S_PSR] @ get calling cpsr
19: ldr lr, [sp, #S_OFF + S_PC]! @ get pc
20: msr spsr_cxsf, r1 @ save in spsr_svc
21: ldmdb sp, {r1 - lr}^ @ get calling r1 - lr22: mov r0, r0
23: add sp, sp, #S_FRAME_SIZE - S_PC
24: movs pc, lr @ return & move spsr_svc into cpsr
25: UNWIND(.fnend )
26:
27: /*
28: * Ok, we need to do extra processing, enter the slow path.
29: */
30: fast_work_pending:
31: str r0, [sp, #S_R0+S_OFF]! @ returned r0
32: work_pending:
33: tst r1, #_TIF_NEED_RESCHED @判斷是否需要進行進程調度
34: bne work_resched
35: tst r1, #_TIF_SIGPENDING
36: beq no_work_pending
37: mov r0, sp @ 'regs'
38: mov r2, why @ 'syscall'
39: bl do_notify_resume
40: b ret_slow_syscall @ Check work again
41:
42:work_resched:
43: bl schedule
44: /*
45: * "slow" syscall return path. "why" tells us if this was a real syscall.
46: */
47: ENTRY(ret_to_user)
48: ret_slow_syscall:
49: disable_irq @ disable interrupts
50: ldr r1, [tsk, #TI_FLAGS]
51: tst r1, #_TIF_WORK_MASK
52: bne work_pending
53: no_work_pending:
54: /* perform architecture specific actions before user return */
55: arch_ret_to_user r1, lr
56:
57: @ slow_restore_user_regs
58: ldr r1, [sp, #S_PSR] @ get calling cpsr
59: ldr lr, [sp, #S_PC]! @ get pc
60: msr spsr_cxsf, r1 @ save in spsr_svc
61: ldmdb sp, {r0 - lr}^ @ get calling r0 - lr62: mov r0, r0
63: add sp, sp, #S_FRAME_SIZE - S_PC
64: movs pc, lr @ return & move spsr_svc into cpsr
65: ENDPROC(ret_to_user)
在返回的時候要看是否要進行進程調用。
先分析到這里。
新聞熱點
疑難解答
圖片精選
