XV6700 AKU3.5 英文版ROM下載及安裝方法

2024-06-10 10:11:04

字體：大中小

來源：轉載

供稿：網友

自從用了凡奇3.0的ROM之后，還算比較穩定，最近閑來無事，逛了逛國外的PDA論壇，偶然發現那邊的XV6700已經更新到AKU3.5了，看了不少人的評論，軟件很穩定，速度超快，下載下來試了一下，果然名不虛傳，安裝了雅黑字體之后就可以完美顯示中文了，手寫使用漢王。之所以沒有安裝CE-Star主要是因為CE-Star的字體太小不好看。

刷機方法：

1）安裝英文原版ROM

2）刷AKU3.5英文ROM

3）等待Extend Rom里面東西安裝完成之后重新啟動，成功！

以下是原文（純凈版）：

First, the bona fides...

Based on Unified ROM PRoject 1.2 Pre-release

Removed:
Cyberon Voice Dial (if you're going to use voice dial at all, get Microsoft's Voice Command 1.6)
Clear Storage (hold down both soft buttons while pressing in on the reset switch to hard reset if you need to)
MSN (all of it)
Intellipad (the goofy T9 SIP)
IA_Zip (Unnecessary with Total Commander)
SMS Retry (might be useful if it was automatic, but it's not...)
Wireless Modem (doesn't work on 3.5, use Internet Sharing instead)

Added:
1-Calc Lite (better calculator)
MMS with Sprint settings (self-explanatory)
Midlet Manager (java Virtual Machine)
Total Commander 2.5 (freeware filemanager, FTP client and registry editor; also makes great fries!)
Windows Live Search (better than Google Maps)

.NET 2.0 Compact Frameworks are preinstalled.

Okay, here's how you use this. Follow this step by step, and nobody gets hurt.

1. Hard reset your phone. As mentioned above, you don't need Clear Storage to do this. Hold down both soft buttons with one hand and poke the reset hole with the other, ideally while holding a stylus in the second hand, unless you have really pointy fingers.

2. Put your phone in Bootloader mode. This is a special condition that prepares the phone to rewrite the ROM. While holding down both the power and record buttons, poke the reset switch, again with a stylus. The backlight should go off and the screen will say "Serial". When you put it in the crade, the screen will change to say "USB" and the backlight will stay off. This is normal. Wait for Windows to recognize the new USB device before moving on.

3. Run Kirvin AKU 3.5 NoJunk.exe. Keep clicking Next until it's done. Do NOT remove your phone from the cradle until it tells you to! Seriously. Don't make me come over there.

4. When told to remove your phone from the cradle, pull it out and hard reset it again. Congratulations! You're running AKU 3.5, probably the closest to Windows Mobile 6 we Apache owners will ever get!

Finally, the download link:

ftp://ppcgeeks:ezupload@up.ppcgeeks.com/Apache/Kirvin/Kirvin_AKU_3.5_NoJunk.zip Stock版： First, the bona fides...

Based on Unified ROM Project 1.2 Pre-release. This is as close as you can get to UT Starcom's AKU release and still get the benefits of AKU 3.5.

Removed:
Wireless Modem (doesn't work on 3.5, use Internet Sharing instead)

Added:
.NET 2.0 Compact Frameworks are preinstalled.

Okay, here's how you use this. Follow this step by step, and nobody gets hurt.

1. Hard reset your phone. As mentioned above, you don't need Clear Storage to do this. Hold down both soft buttons with one hand and poke the reset hole with the other, ideally while holding a stylus in the second hand, unless you have really pointy fingers.

2. Put your phone in Bootloader mode. This is a special condition that prepares the phone to rewrite the ROM. While holding down both the power and record buttons, poke the reset switch, again with a stylus. The backlight should go off and the screen will say "Serial". When you put it in the crade, the screen will change to say "USB" and the backlight will stay off. This is normal. Wait for Windows to recognize the new USB device before moving on.

3. Run Kirvin AKU 3.5 Stock.exe. Keep clicking Next until it's done. Do NOT remove your phone from the cradle until it tells you to! Seriously. Don't make me come over there.

4. When told to remove your phone from the cradle, pull it out and hard reset it again. Congratulations! You're running AKU 3.5, probably the closest to Windows Mobile 6 we Apache owners will ever get!

Finally, the download link:

ftp://ppcgeeks:ezupload@up.ppcgeeks.com/Apache/Kirvin/Kirvin_AKU_3.5_Stock.zip

上一篇：讓E50變雷達

下一篇：E50之蚊蟲逃光光——驅蚊大師