發一個ASP的ADODB類代碼
2020-07-27 13:04:32
供稿：網友
反正我現在用這個做了很多站，自己覺得還是滿有用的，所以拿出來和大家分享一下。支持三種數據庫連接：MSSQL2000，MSSQL2005，ACCESS
三種方法：
select_table(sql)
表查詢，返回TRUE或FALSE
當SQL語句出錯，或空記錄時返回FALSE，否則TRUE
update_table(SQL)
表更新，包括update,delete
成功執行返回TRUE，否則返回FALSE，updated為執行后影響記錄行數。
insert_table(sql,table,id_column)
table為表名，id_column為表中自動編號，自增字段。
當成功執行返回TRUE，否則返回FALSE，指定TABLE，ID_column后，將返回最后添加記錄所產生的自增ID。
select_table()相關方法Select_page(page,psize)
分頁處理，page為當前頁，psize為每頁記錄行數。
所有操作時，自動檢測數據庫鏈接和RS是否打開，執行后將自動關閉數據庫鏈接。
示例：
set db = new adodb_class
if db.select_table("select * from news order by id desc") then
page = request("page")
Select_page(page,20)'每頁20條
for i=1 to 20
response.write db.rs("title")'類內置rs，不可變
db.rs.movenext
if db.rs.eof then exit for
next
end if
db.rsPage = 總頁數，db.nowPage= 經過處理后當前頁，db.rsCounts數總記錄數量。
if db.update_table("delete from news where ispass=1") then'update同樣
response.write "共刪除"&db.updated&"行"
end if
call db.insert_table("insert into news (title,content) values ('"&title&"','"&content&"')","news","id")
response.write "最后添加ID為"&db.Insertd
在頁面最尾可輸出db.readCounts 為查詢數據庫次數。
--------------------------------------------
本類好處就是你不必擔心忘記關閉數據庫鏈接，不用頻繁set rs = server.recordset("adodb.recordset"),也不用set rs = nothing
缺點就是翻頁用的傳統方式。rs.absolutepage = rs.pagesize
----------------------------------------------------------
<%
'/******kshop******/
' adodb_class.asp 數據庫操作類
' Version 1.0
' Copyright [email]simple_1982@hotmail.com[/email]
' E-mail [email]xsg2005@163.com[/email]
'/*****************/
class adodb_class
dim conn,connstr,rs
dim dbclass'數據庫類型access,sql2000,sql2005三個值之一
dim SqlDbName,SqlUser,SqlPass,SqlServer
dim SqlAccess
dim Selectd,Insertd,Updated
dim rsCounts,rsPage,readCounts,nowPage '記錄集 總數/頁數 查詢次數
Private Sub Class_Initialize()
SqlDbName = ""
SqlUser = ""
SqlPass = ""
SqlServer = ""
SqlAccess = "/simple_date/simple_xiehui.mdb"
rsCounts = 0:rsPage = 1:readCounts = 0:nowPage = 1
Call OpenConn("access")
selectd = 0
Insertd = 0
Updated = 0
End Sub
'********打開數據庫鏈接******************
Private Sub AccessConn()
connstr="Provider=Microsoft.Jet.OLEDB.4.0;Data Source=" & server.mappath(SqlAccess) &";Persist Security Info=False"
End Sub
Private Sub Sql2kConn()
connstr = "driver={SQL server};server="&SqlServer&";uid="&SqlUser&";pwd="&SqlPass&";database="&SqlDbName
End Sub
Private Sub Sql2k05Conn()
connstr="Provider=SQLNCLI.1;Password="&SqlPass&";User ID="&SqlUser&";Initial Catalog="&SqlDbName&";Data Source="&SqlServer
End Sub
Private Sub OpenConn(db_class)
dbclass = db_class
select case db_class
case "access":call AccessConn()
case "sql2000":call Sql2kConn()
case "sql2005":call Sql2k05Conn()
end select
on error resume next
set conn = server.CreateObject("adodb.Connection")
conn.open connstr
if err then
Response.write "數據庫鏈接失敗<br>sqlstring = " + connstr
Response.End()
err.clear
end if
End Sub
'**********結束/查詢構造*************
Public Function Select_Table(sql)
if not not isempty(conn) or isnull(conn) then
call OpenConn(dbclass)
elseif conn.state = 0 then
call OpenConn(dbclass)
end if
on error resume next
Set rs = Server.CreateObject("adodb.recordset")
rs.open sql,conn,1,1
if err then
Select_Table = False
rs.close
exit Function
err.clear
End If
If rs.eof and rs.bof then
rs.close
Select_Table = false
Else
Select_Table = true
End If
readCounts = readCounts + 1
End Function
'分頁處理
Public Function Select_page(page,psize)
if isnull(page) or page = "" then page = 1
if page < 1 then page = 1
if rs.state = 1 then
if not rs.eof then
rs.pagesize = psize
rsPage = rs.pagecount
rsCounts = rs.recordcount
if int(page) > Int(rsPage) then page = rsPage
rs.absolutepage = page:nowPage = page
end if
end if
End Function
'更新記錄
Public Function Update_Table(Sql)
if not isempty(conn) or isnull(conn) then
call OpenConn(dbclass)
elseif conn.state = 0 then
call OpenConn(dbclass)
end if
on error resume next
if Sql <> "" then
conn.Execute Sql,Updated
if err then
Update_Table = false
err.clear
else
Update_Table = true
end if
Else
Update_Table = false
end if
conn.close
Set conn = nothing
End Function
'增加
'輸入：insert SQL語句，表名，自增字段
Public Function Insert_Table(sql,table,id_column)
if not isempty(conn) or isnull(conn) then
call OpenConn(dbclass)
elseif conn.state = 0 then
call OpenConn(dbclass)
end if
on error resume next
if sql <> "" then
conn.Execute(sql)
if err then
Insert_Table = false:err.clear
else
Insert_Table = true
end if
'獲得最后增加ID
if table <> "" and id_column <> "" then
Set ds = conn.Execute("select "&id_column&" from "&table&" order by "&id_column&" desc")
end if
if err then
Insertd = 0:err.clear
else Insertd = ds(0)
end if
Set ds = nothing
closed()
else
Insert_Table = false
end if
End Function
'關閉數據庫鏈接
Public Function closed()
if not isempty(rs) and not isnull(rs) then
if rs.state = 1 then
rs.close
end if
end if
rsCounts = 0:rsPage = 1:nowPage = 1
end function
'**********釋放類************
Private Sub Class_Terminate()
readCounts = 0:rsCounts = 0:rsPage = 0
if not isempty(conn) and not isnull(conn) then
if conn.state = 1 then
conn.close
end if
Set conn = nothing
end if
if not isempty(rs) then
if not isnull(rs) then
if rs.state=1 then
rs.close
end if
set rs=nothing
end if
end if
End Sub
End Class
%>
