設置pptp vpn 開機啟動
有的人懶的重啟后手動開啟服務，所以下面我再補上開機自動啟動pptp vpn 和 iptables的命令
代碼如下:
#chkconfig pptpd on //開機啟動pptp vpn服務
#chkconfig iptables on //開機啟動iptables
貼個openvz的pptp vpn 一件安裝包吧：centos，fedora，redhat 6.x 使用的腳本(vps上從沒安裝過的可以試試這個腳本): 點擊下載
代碼如下:
#!/bin/bash
# Interactive pptp vpn install script for an OpenVZ VPS
# surport : Cenost ,Fedora 6.x
# Augest 24, 2014 v1.00
#url ： http://www.dabu.info/?p=2178
echo "######################################################"
echo "Interactive PoPToP Install Script for an OpenVZ VPS"
echo
echo "Make sure to contact your provider and have them enable"
echo "IPtables and ppp modules prior to setting up PoPToP."
echo "PPP can also be enabled from SolusVM."
echo
echo "You need to set up the server before creating more users."
echo "A separate user is required per connection or machine."
echo "######################################################"
echo
echo
echo "######################################################"
echo "Select on option:"
echo "1) Set up new PoPToP server AND create one user"
echo "2) Create additional users"
echo "######################################################"
read x
if test $x -eq 1; then
echo "Enter username that you want to create (eg. client1 or john):"
read u
echo "Specify password that you want the server to use:"
read p
## get the VPS IP
#ip=`ifconfig venet0:0 | grep inet addr | awk {print $2} | sed s/.*://`
echo
echo "######################################################"
echo "Downloading and Installing ppp and pptpd "
echo "######################################################"
yum install ppp -y
rpm -Uvh http://poptop.sourceforge.net/yum/stable/rhel6/pptp-release-current.noarch.rpm
yum install pptpd -y
echo
echo "######################################################"
echo "Creating Server Config"
echo "######################################################"
cp /etc/ppp/options.pptpd /etc/ppp/options.pptpd.bak
sed -i 70a ms-dns 8.8.8.8 /etc/ppp/options.pptpd
# setting up pptpd.conf
sed -i 101a localip 192.168.9.1 /etc/pptpd.conf
sed -i 102a remoteip 192.168.9.11-30 /etc/pptpd.conf
# adding new user
echo "$u * $p *" >> /etc/ppp/chap-secrets
echo
echo "######################################################"
echo "Forwarding IPv4 and Enabling it on boot"
echo "######################################################"
cat >> /etc/sysctl.conf <
net.ipv4.ip_forward=1
END
sysctl -p
echo
echo "######################################################"
echo "Updating IPtables Routing and Enabling it on boot"
echo "######################################################"
iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE
# saves iptables routing rules and enables them on-boot
iptables-save > /etc/iptables.conf
cat > /etc/network/if-pre-up.d/iptables <
#!/bin/sh
iptables-restore < /etc/iptables.conf
END
chmod +x /etc/network/if-pre-up.d/iptables
cat >> /etc/ppp/ip-up <
ifconfig ppp0 mtu 1400
END
echo
echo "######################################################"
echo "Restarting PoPToP"
echo "######################################################"
sleep 5
/etc/init.d/pptpd restart
echo
echo "######################################################"
echo "Server setup complete!"
echo "Connect to your VPS at $ip with these credentials:"
echo "Username:$u ##### Password: $p"
echo "######################################################"
# runs this if option 2 is selected
elif test $x -eq 2; then
echo "Enter username that you want to create (eg. client1 or john):"
read u
echo "Specify password that you want the server to use:"
read p
# adding new user
echo "$u * $p *" >> /etc/ppp/chap-secrets
echo
echo "######################################################"
echo "Addtional user added!"
echo "Connect to your VPS at $ip with these credentials:"
echo "Username:$u ##### Password: $p"
echo "######################################################"
else
echo "Invalid selection, quitting."
exit
fi
#!/bin/bash
# Interactive pptp vpn install script for an OpenVZ VPS
# surport : Cenost ,Fedora 6.x
# Augest 24, 2014 v1.00
#url ： http://www.dabu.info/?p=2178
echo "######################################################"
echo "Interactive PoPToP Install Script for an OpenVZ VPS"
echo
echo "Make sure to contact your provider and have them enable"
echo "IPtables and ppp modules prior to setting up PoPToP."
echo "PPP can also be enabled from SolusVM."
echo
echo "You need to set up the server before creating more users."
echo "A separate user is required per connection or machine."
echo "######################################################"
echo
echo
echo "######################################################"
echo "Select on option:"
echo "1) Set up new PoPToP server AND create one user"
echo "2) Create additional users"
echo "######################################################"
read x
if test $x -eq 1; then
echo "Enter username that you want to create (eg. client1 or john):"
read u
echo "Specify password that you want the server to use:"
read p
## get the VPS IP
#ip=`ifconfig venet0:0 | grep inet addr | awk {print $2} | sed s/.*://`
echo
echo "######################################################"
echo "Downloading and Installing ppp and pptpd "
echo "######################################################"
yum install ppp -y
rpm -Uvh http://poptop.sourceforge.net/yum/stable/rhel6/pptp-release-current.noarch.rpm
yum install pptpd -y
echo
echo "######################################################"
echo "Creating Server Config"
echo "######################################################"
cp /etc/ppp/options.pptpd /etc/ppp/options.pptpd.bak
sed -i 70a ms-dns 8.8.8.8 /etc/ppp/options.pptpd
# setting up pptpd.conf
sed -i 101a localip 192.168.9.1 /etc/pptpd.conf
sed -i 102a remoteip 192.168.9.11-30 /etc/pptpd.conf
# adding new user
echo "$u * $p *" >> /etc/ppp/chap-secrets
echo
echo "######################################################"
echo "Forwarding IPv4 and Enabling it on boot"
echo "######################################################"
cat >> /etc/sysctl.conf <
net.ipv4.ip_forward=1
END
sysctl -p
echo
echo "######################################################"
echo "Updating IPtables Routing and Enabling it on boot"
echo "######################################################"
iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE
# saves iptables routing rules and enables them on-boot
iptables-save > /etc/iptables.conf
cat > /etc/network/if-pre-up.d/iptables <
#!/bin/sh
iptables-restore < /etc/iptables.conf
END
chmod +x /etc/network/if-pre-up.d/iptables
cat >> /etc/ppp/ip-up <
ifconfig ppp0 mtu 1400
END
echo
echo "######################################################"
echo "Restarting PoPToP"
echo "######################################################"
sleep 5
/etc/init.d/pptpd restart
echo
echo "######################################################"
echo "Server setup complete!"
echo "Connect to your VPS at $ip with these credentials:"
echo "Username:$u ##### Password: $p"
echo "######################################################"
# runs this if option 2 is selected
elif test $x -eq 2; then
echo "Enter username that you want to create (eg. client1 or john):"
read u
echo "Specify password that you want the server to use:"
read p
# adding new user
echo "$u * $p *" >> /etc/ppp/chap-secrets
echo
echo "######################################################"
echo "Addtional user added!"
echo "Connect to your VPS at $ip with these credentials:"
echo "Username:$u ##### Password: $p"
echo "######################################################"
else
echo "Invalid selection, quitting."
exit
fi
復制下面代碼到install.sh中，然后 sh isntall.sh。這個是只支持debian和ubuntu系列，centos不支持。
代碼如下:
#!/bin/bash
# Interactive PoPToP install script for an OpenVZ VPS
# Tested on Debian 5, 6, and Ubuntu 11.04
# April 2, 2013 v1.11
# http://www.putdispenserhere.com/pptp-debian-ubuntu-openvz-setup-script/
echo "######################################################"
echo "Interactive PoPToP Install Script for an OpenVZ VPS"
echo
echo "Make sure to contact your provider and have them enable"
echo "IPtables and ppp modules prior to setting up PoPToP."
echo "PPP can also be enabled from SolusVM."
echo
echo "You need to set up the server before creating more users."
echo "A separate user is required per connection or machine."
echo "######################################################"
echo
echo
echo "######################################################"
echo "Select on option:"
echo "1) Set up new PoPToP server AND create one user"
echo "2) Create additional users"
echo "######################################################"
read x
if test $x -eq 1; then
echo "Enter username that you want to create (eg. client1 or john):"
read u
echo "Specify password that you want the server to use:"
read p
# get the VPS IP
ip=`ifconfig venet0:0 | grep inet addr | awk {print $2} | sed s/.*://`
echo
echo "######################################################"
echo "Downloading and Installing PoPToP"
echo "######################################################"
apt-get update
apt-get -y install pptpd
echo
echo "######################################################"
echo "Creating Server Config"
echo "######################################################"
cat > /etc/ppp/pptpd-options <
name pptpd
refuse-pap
refuse-chap
refuse-mschap
require-mschap-v2
require-mppe-128
ms-dns 8.8.8.8
ms-dns 8.8.4.4
proxyarp
nodefaultroute
lock
nobsdcomp
END
# setting up pptpd.conf
echo "option /etc/ppp/pptpd-options" > /etc/pptpd.conf
echo "logwtmp" >> /etc/pptpd.conf
echo "localip $ip" >> /etc/pptpd.conf
echo "remoteip 10.1.0.1-100" >> /etc/pptpd.conf
# adding new user
echo "$u * $p *" >> /etc/ppp/chap-secrets
echo
echo "######################################################"
echo "Forwarding IPv4 and Enabling it on boot"
echo "######################################################"
cat >> /etc/sysctl.conf <
net.ipv4.ip_forward=1
END
sysctl -p
echo
echo "######################################################"
echo "Updating IPtables Routing and Enabling it on boot"
echo "######################################################"
iptables -t nat -A POSTROUTING -j SNAT --to $ip
# saves iptables routing rules and enables them on-boot
iptables-save > /etc/iptables.conf
cat > /etc/network/if-pre-up.d/iptables <
#!/bin/sh
iptables-restore < /etc/iptables.conf
END
chmod +x /etc/network/if-pre-up.d/iptables
cat >> /etc/ppp/ip-up <
ifconfig ppp0 mtu 1400
END
echo
echo "######################################################"
echo "Restarting PoPToP"
echo "######################################################"
sleep 5
/etc/init.d/pptpd restart
echo
echo "######################################################"
echo "Server setup complete!"
echo "Connect to your VPS at $ip with these credentials:"
echo "Username:$u ##### Password: $p"
echo "######################################################"
# runs this if option 2 is selected
elif test $x -eq 2; then
echo "Enter username that you want to create (eg. client1 or john):"
read u
echo "Specify password that you want the server to use:"
read p
# get the VPS IP
ip=`ifconfig venet0:0 | grep inet addr | awk {print $2} | sed s/.*://`
# adding new user
echo "$u * $p *" >> /etc/ppp/chap-secrets
echo
echo "######################################################"
echo "Addtional user added!"
echo "Connect to your VPS at $ip with these credentials:"
echo "Username:$u ##### Password: $p"
echo "######################################################"
else
echo "Invalid selection, quitting."
exit
fi
#!/bin/bash
# Interactive PoPToP install script for an OpenVZ VPS
# Tested on Debian 5, 6, and Ubuntu 11.04
# April 2, 2013 v1.11
# http://www.putdispenserhere.com/pptp-debian-ubuntu-openvz-setup-script/
echo "######################################################"
echo "Interactive PoPToP Install Script for an OpenVZ VPS"
echo
echo "Make sure to contact your provider and have them enable"
echo "IPtables and ppp modules prior to setting up PoPToP."
echo "PPP can also be enabled from SolusVM."
echo
echo "You need to set up the server before creating more users."
echo "A separate user is required per connection or machine."
echo "######################################################"
echo
echo
echo "######################################################"
echo "Select on option:"
echo "1) Set up new PoPToP server AND create one user"
echo "2) Create additional users"
echo "######################################################"
read x
if test $x -eq 1; then
echo "Enter username that you want to create (eg. client1 or john):"
read u
echo "Specify password that you want the server to use:"
read p
# get the VPS IP
ip=`ifconfig venet0:0 | grep inet addr | awk {print $2} | sed s/.*://`
echo
echo "######################################################"
echo "Downloading and Installing PoPToP"
echo "######################################################"
apt-get update
apt-get -y install pptpd
echo
echo "######################################################"
echo "Creating Server Config"
echo "######################################################"
cat > /etc/ppp/pptpd-options <
name pptpd
refuse-pap
refuse-chap
refuse-mschap
require-mschap-v2
require-mppe-128
ms-dns 8.8.8.8
ms-dns 8.8.4.4
proxyarp
nodefaultroute
lock
nobsdcomp
END
# setting up pptpd.conf
echo "option /etc/ppp/pptpd-options" > /etc/pptpd.conf
echo "logwtmp" >> /etc/pptpd.conf
echo "localip $ip" >> /etc/pptpd.conf
echo "remoteip 10.1.0.1-100" >> /etc/pptpd.conf
# adding new user
echo "$u * $p *" >> /etc/ppp/chap-secrets
echo
echo "######################################################"
echo "Forwarding IPv4 and Enabling it on boot"
echo "######################################################"
cat >> /etc/sysctl.conf <
net.ipv4.ip_forward=1
END
sysctl -p
echo
echo "######################################################"
echo "Updating IPtables Routing and Enabling it on boot"
echo "######################################################"
iptables -t nat -A POSTROUTING -j SNAT --to $ip
# saves iptables routing rules and enables them on-boot
iptables-save > /etc/iptables.conf
cat > /etc/network/if-pre-up.d/iptables <
#!/bin/sh
iptables-restore < /etc/iptables.conf
END
chmod +x /etc/network/if-pre-up.d/iptables
cat >> /etc/ppp/ip-up <
ifconfig ppp0 mtu 1400
END
echo
echo "######################################################"
echo "Restarting PoPToP"
echo "######################################################"
sleep 5
/etc/init.d/pptpd restart
echo
echo "######################################################"
echo "Server setup complete!"
echo "Connect to your VPS at $ip with these credentials:"
echo "Username:$u ##### Password: $p"
echo "######################################################"
# runs this if option 2 is selected
elif test $x -eq 2; then
echo "Enter username that you want to create (eg. client1 or john):"
read u
echo "Specify password that you want the server to use:"
read p
# get the VPS IP
ip=`ifconfig venet0:0 | grep inet addr | awk {print $2} | sed s/.*://`
# adding new user
echo "$u * $p *" >> /etc/ppp/chap-secrets
echo
echo "######################################################"
echo "Addtional user added!"
echo "Connect to your VPS at $ip with these credentials:"
echo "Username:$u ##### Password: $p"
echo "######################################################"
else
echo "Invalid selection, quitting."
exit
fi
新聞熱點
疑難解答
