1、 修改AS列表的屬性只能在EBGP的出方向上增加這個屬性并且只能添加在AS-PATH列表的前面。同時證實在EBGP的進入方向無法添加AS號碼。
	   2 、關(guān)于缺省路由,在BGP中缺省路由最好是通過一條IGP比如靜態(tài)的缺省路由,然后network 0.0.0.0 0.0.0.0則可以得到通告。
	也可以在BGP下使用1 default-route imported,2 import-route static。
	   3 、BGP的network只能通告非BGP的路由,比如R1---R2---R3,R1上某路由在R2上的BGP路由再次network則不可以生效。
	   
	AR18配置
	[AR18]dis cur
	  Now create configuration...
	  Current configuration
	  !
	    version 1.74
	    sysname AR18
	    firewall enable
	    aaa-enable
	    aaa accounting-scheme optional
	  !
	  acl 2000 match-order auto
	    rule normal permit source 20.20.30.0 0.0.0.255
	    rule normal deny source any
	  !
	  interface Aux0
	    async mode flow
	    flow-control none
	    link-protocol ppp
	  !
	  interface Ethernet0
	  !
	  interface Serial0
	    link-protocol ppp
	    ip address 1.1.1.10 255.255.255.252
	  !                                      
	  interface Serial1
	    clock DTECLK1
	    link-protocol ppp
	    ip address 1.1.1.14 255.255.255.252
	  !
	  interface LoopBack1
	    ip address 20.20.10.254 255.255.255.0
	  !
	  interface LoopBack2
	    ip address 20.20.20.254 255.255.255.0
	  !
	  interface LoopBack3
	    ip address 20.20.30.254 255.255.255.0
	  !
	  quit
	  bgp 200
	    undo synchronization
	    import-route direct route-policy lv
	    peer 1.1.1.9 as-number 200
	    peer 1.1.1.13 as-number 200
	  !
	  quit
	  !
	  quit
	  route-policy lv permit 1
	    if-match ip address 2000                   
      (責(zé)任編輯:VEVB)
新聞熱點
疑難解答