===========pu_insert過程的delphi源碼如下====================
PRocedure pu_insert(tablename:string;sarr:array of string);
var rets,s,s1,s2:string;i,j,k,m,l:integer;c:char;
begin
rets:='(';l:=high(sarr);
for i:=0 to l do
 begin
    s:=sarr[i];k:=0; s1:='';
    m:=length(s);
    for j:=0 to m do
     begin
        if s[j]=#9 then inc(k) else
           begin
             if k=1 then s1:=s1+s[j];
           end;
     end;
    if i=l then rets:=rets+s1+') values(' else rets:=rets+s1+',';
 end;           //以上取完了所有鍵名
for i:=0 to l do
 begin
    s:=sarr[i];k:=0; s1:='';s2:='';
    m:=length(s);
    for j:=0 to m do
     begin
        if s[j]=#9 then inc(k) else
           begin
             if k=2 then s1:=s1+s[j];
             if k=11 then s2:=s2+s[j];
           end;
     end;
    c:=upcase(s1[1]);
    if i=l then begin
                   if (c='D') and (s2='') then rets:=rets+' null) ' else  //日期為空時
                   if (c='F') or (c='I') then rets:=rets+s2+') ' else     //數值類型
                   rets:=rets+#39+s2+#39+') ';                            //#39是MSSQL字串分隔符
                end
                   else
                begin
                   if (c='D') and (s2='') then rets:=rets+' null,' else
                   if (c='F') or (c='I') then rets:=rets+s2+',' else rets:=rets+#39+s2+#39+',';
                end;
 end;
if debug then tell('insert into '+tablename+' '+rets);
pu_exec('insert into '+tablename+' '+rets);
end;

我還編了另一個過程pu_update也類似,只是多了一個條件參數,就不介紹了。
因為這種方法在運行時要解釋執行,比較慢,正式發布前,我會用另一個工具對源代碼進行翻譯成真正的SQL,這個工具軟件的核心源碼摘錄如下：
function doinsert2(ss:string):string;
var l:tstringlist;i,j:integer;s:string;st:string;hav:boolean;
    ch:string;label next1,next2,next3;
begin//
try l:=tstringlist.create;
s:='';
for i:=1 to length(ss) do//分行,第一行專用
begin
 if (ss[i]<>#13) and (ss[i]<>#10) then s:=s+ss[i];
 if ss[i]=#13 then begin l.Add(s);s:='' end;
end;
for i:=1 to l.count-1 do//清除第一個'號前的所有字符
  begin
     if l[i][1]='/' then goto next3;
     hav:=false;
     s:='';for j:=1 to length(l[i]) do
           begin
              if l[i][j]=#39 then hav:=true;
              if hav then s:=s+l[i][j];
           end;
    l[i]:=s;
    next3:
  end;
st:='///insert'#13#10+
'pu_exec('#39'insert into '+myfind(ss,12,#39)+' (';
for i:=1 to l.Count-1 do
 begin
   if l[i][1]='/' then goto next1;
   if (i<>l.count-1) and ((i mod 8)=0) then st:=st+#39'+'#13#10#39;
   if i<>l.count-1 then st:=st+mytab(l[i],1)+','
                   else st:=st+mytab(l[i],1)+') values('#39;
 next1:
 end;
for i:=1 to l.Count-1 do
 begin
   if l[i][1]='/' then goto next2;
   st:=st+#13#10;
   if mytab(l[i],2)[1] in ['F','I','f','i'] then ch:='' else ch:='#39+';
   if i<>l.count-1 then st:=st+'+'+ch+mytab(l[i],12)+'+'+ch+#39','#39
                   else st:=st+'+'+ch+mytab(l[i],12)+'+'+ch+#39')'#39')';
 next2:
 end;
result:=st;
finally
l.Free;
end;
end;

function doupdate(ss:string):string;
var l:tstringlist;i,j:integer;s:string;st:string;hav:boolean;
    ch:string;label next1,next2,next3;
begin//
try l:=tstringlist.create;
s:='';
for i:=1 to length(ss) do//分行,第一行專用
begin
 if (ss[i]<>#13) and (ss[i]<>#10) then s:=s+ss[i];
 if ss[i]=#13 then begin l.Add(s);s:='' end;
end;
for i:=1 to l.count-1 do//清除第一個'號前的所有字符
  begin
     if l[i][1]='/' then goto next3;
     hav:=false;
     s:='';for j:=1 to length(l[i]) do
           begin
              if l[i][j]=#39 then hav:=true;
              if hav then s:=s+l[i][j];
           end;
    l[i]:=s;
   next3:
  end;
st:='///update'#13#10+
'pu_exec('#39'update '+myfind(ss,12,#39)+' set '#39;
for i:=1 to l.Count-1 do
 begin
   if l[i][1]='/' then goto next1;
   st:=st+#13#10'+'#39;
   if mytab(l[i],2)[1] in ['F','I','f','i'] then ch:='' else ch:='#39+';
   st:=st+mytab(l[i],1)+'='#39;
   if i<>l.count-1 then st:=st+'+'+ch+mytab(l[i],12)+'+'+ch+#39','#39
                   else st:=st+'+'+ch+mytab(l[i],12)+'+'+ch;
 next1:
 end;
i:=pos(',',l[0]);
st:=st+#39' where '#39'+'+myfind(l[0],i+1,',')+')';
result:=st;
finally
l.Free;
end;
end;
// end of doupdate

function doinsert(ss:string):string;
var st,s,sod,snew:string;i,i1,i2,i3,i4,l:integer;hav:boolean;
begin//
st:=ss;
//開始qkinsert
repeat
i1:=pos('pu_insert('#39,st); if i1<=0 then break;
        sod:='';
        for i:=i1 to length(st) do
          begin
            sod:=sod+st[i];
            if (st[i]=')') and (st[i-1]=']') and ((st[i+1]=';') or (st[i-2]=#10) or (st[i-2]=#13)) then break;
          end;
        snew:=doinsert2(sod);
        st:=stringreplace(st,sod,snew,[rfReplaceAll]);
until 1>2;

//開始qkupdate
repeat
i1:=pos('pu_update('#39,st); if i1<=0 then break;
        sod:='';
        for i:=i1 to length(st) do
          begin
            sod:=sod+st[i];
            if (st[i]=')') and (st[i-1]=']') and ((st[i+1]=';') or (st[i-2]=#10) or (st[i-2]=#13)) then break;
          end;
        snew:=doupdate(sod);
        st:=stringreplace(st,sod,snew,[rfReplaceAll]);
until 1>2;
result:=st;
end;

procedure TForm1.Button11Click(Sender: TObject);label lb1;
var
  sr: TSearchRec;
  i1,FileAttrs,i: Integer;
  t,f:file;
  a:array[1..1000000]of char;s1,fff:string;
  st:string;stin:string;
begin
 if open1.Execute=false then exit;
 s1:=open1.FileName;
 memo2.text:=''; FileAttrs :=  faAnyFile;
 s1:=extractfilepath(s1);//showmessage(s1);exit;
 if FindFirst(s1+'*.pas',FileAttrs, sr) = 0 then
      repeat
       if sr.attr=fareadonly then begin memo2.text:=memo2.text+'操作失敗:';goto lb1 end;
       if sr.attr=faVolumeID then begin memo2.text:=memo2.text+'操作失敗:'; goto lb1 end;
       if sr.attr=fadirectory then begin memo2.text:=memo2.text+'操作失敗:'; goto lb1 end;
       assignfile(t,s1+sr.Name);
       reset(t,1);
       blockread(t,a,1000000,i1);
       closefile(t);
       if i1>=1000000 then begin memo2.text:=memo2.text+'文件太大,操作失敗';goto lb1 end;
       if i1>0 then
         try
         stin:='';
         for i:=1 to i1 do stin:=stin+a[i];
         if deb=10 then showmessage('in          '+stin);
         st:=doinsert(stin);
         if deb=10 then showmessage('out            '+st);
         assignfile(f,s1+sr.Name);
         rewrite(f,1);
         blockwrite(f,st[1],length(st));
         closefile(f);
         except
           memo2.Text:=memo2.text+'打開失敗:'
         end;
 lb1:  memo2.Text:=memo2.text+sr.name+#13#10;
       application.ProcessMessages;
       until FindNext(sr) <> 0;
end;

我是這樣寫復雜的查詢語句的,如我編了一個查詢當前發庫的窗口,源程序主體(下例中的前16行)也是從EXCEL排好版粘過來,
注意這個示例中不僅生成了SQL，而且還設定了dbgrid1的各字段的寬度，及字段的中文名。也就是說它的數據顯示隨源程序而變。
t.s_add(1,'s','','a.trnno','發貨單號',90,'','','','');
t.s_add(1,'s','','a.orderno','訂單號',90,'','','','');
t.s_add(1,'s','','c.branchcode','分公司',61,'','','','');
t.s_add(1,'s','','month(a.times)','月份',60,'','','','');
t.s_add(1,'s','','a.times','發貨日期',75,'','','','');
t.s_add(1,'s','','upper(b.modleserial)','系列',60,'','','','');
t.s_add(1,'s','','a.k_modle','成品型號',100,'','','','');
t.s_add(1,'s','','b.modlesm','成品說明',100,'','','','');
t.s_add(1,'s','','(-a.qty)','發貨數量',75,'','','','');
t.s_add(1,'s','','a.n_ccj','標準出廠價',85,'','','','');
t.s_add(1,'s','','(-a.qty * a.n_ccj)','出廠價總額',130,'','','','');
t.s_add(1,'s','','b.factoryprice','當前出廠價',85,'','','','');
t.s_add(1,'s','','(-a.qty * b.factoryprice)','當前價總額',130,'','','','');
t.s_add(1,'s','','a.realccj','訂單出廠價',85,'','','','');
t.s_add(1,'s','','(-a.qty * a.realccj)','訂單價總額',130,'','','','');
t.s_add(1,'s','','d.remark','備注',150,'','','','');
t.s_add(1,'f','','chg_stkcrd a,modle b,orders c,fhd d','',0,'','','','');
t.s_add(1,'w','','','',0,'','','','a.k_modle=b.modle and a.k_fid='+_factid+' and a.trntype='#39'發貨'#39
              +' and a.orderno=c.orderno and a.trnno=d.fhdcode');
t.s_add(1,'w','cxbuttonedit2','a.k_modle','',0,'=',#39,#39,'');
t.s_add(1,'w','cxbuttonedit1','b.modlesm','',0,'like',#39'%','%'#39,'');
t.s_add(1,'w','cxbuttonedit7','b.modleserial','',0,'=',#39,#39,'');
t.s_add(1,'w','cxtextedit5','(-a.qty)','',0,'>=','','','');
t.s_add(1,'w','cxtextedit4','(-a.qty)','',0,'<=','','','');
t.s_add(1,'w','cxdateedit1','a.times','',0,'>=',#39,#39,'');
t.s_add(1,'w','cxdateedit2','a.times','',0,'<=',#39,c59+#39,'');
t.s_add(1,'w','cxbuttonedit3','a.trnno','',0,'=',#39,#39,'');
t.s_add(1,'w','cxbuttonedit5','a.orderno','',0,'=',#39,#39,'');
t.s_add(1,'w','cxbuttonedit6','c.branchcode','',0,'=',#39,#39,'');
pu_cdsql(q1,t.s_getsql(1)); //執行SQL并放在cd1這個內存表中
t.S_GridWidth(1,dbgrid1);   //設dbgrid1各個字段的寬度
其中T是一個專用于生成SQL的對象(源代碼較長，略過)，其運行畫面及產生的SQL語句見此blog后附的圖片
總之我這種方法寫SQL,非?？欤揖S護方便，編一個查詢窗口總共不到50行代碼就完事了。