使用的方法是采用DHCP方式為用戶分配ip，然后限定這些用戶只能使用動態IP的方式，假如改成靜態IP的方式則不能連接上網絡；也就是使用了DHCP SNOOPING功能。
例子：
version 12.1
no service pad
service timestamps debug uptime
service timestamps log uptime
no service p assWord-encryption
service comPRess-config
!
hostname C4-2_4506
!
enable password xxxxxxx!
clock timezone GMT 8
ip subnet-zero


no ip domain-lookup
!
ip dhcp snooping vlan 180-181 // 對哪些VLAN 進行限制
ip dhcp snooping
ip arp inspection vlan 180-181
ip arp inspection validate src-mac dst-mac ip




errdisable recovery cause udld
errdisable recovery cause bpduguard
errdisable recovery cause security-violation
errdisable recovery cause channel-misconfig
errdisable recovery cause pagp-flap
errdisable recovery cause dtp-flap
errdisable recovery cause link-flap
errdisable recovery cause l2ptguard
errdisable recovery cause psecure-violation
errdisable recovery cause gbic-invalid
errdisable recovery cause dhcp-rate-limit
errdisable recovery cause unicast-flood
errdisable recovery cause vmps
errdisable recovery cause arp-inspection
errdisable recovery interval 30
spanning-tree extend system-id
!
!

interface GigabitEthernet2/1 // 對該端口接入的用戶進行限制，可以下聯交換機
ip arp inspection limit rate 100
arp timeout 2
ip dhcp snooping limit rate 100
!



interface GigabitEthernet2/2
ip arp inspection limit rate 100
arp timeout 2
ip dhcp snooping limit rate 100
!
interface GigabitEthernet2/3
ip arp inspection limit rate 100
arp timeout 2
ip dhcp snooping limit rate 100
!
interface GigabitEthernet2/4
ip arp inspection limit rate 100
arp timeout 2
ip dhcp snooping limit rate 100
--More--

編者注：對不需要明確地址的所有人的時候是一個很好的解決辦法。另外，可以查看www.cisco.com的

IP Source Guard
Similar to DHCP snooping, this feature is enabled on a DHCP snooping untrusted Layer 2 port. Initially, all IP traffic on the port is blocked except for DHCP packets that are captured by the DHCP snooping process. When a client receives a valid IP address from the DHCP server, or when a static IP source binding is configured by the user, a per-port and VLAN access Control List (PACL) is installed on the port. This process restricts the client IP traffic to those source IP addresses configured in the binding; any IP traffic with a source IP address other than that in the IP source binding will be filtered out. This filtering limits a host's ability to attack the network by claiming neighbor host's IP address.